Cyberex Branch Circuit Management

Managing individual circuit loading is critical to the reliability of your center.  The Branch Circuit Management (BCM) system provides accurate load management information and alerts you of potential problems before the affect your operation.  User configurable set points allow you to know when each circuit is approaching a load threshold that could open your supply to that device.

Features

• Factory integrated as an optional feature to your PDU or RPP; the BCM system can be used for communicating valuable information to your central management system or to a local or remote display panel
• The BCM actively monitors the load current of each of your circuits and reports this information to you for cost allocation or load protection management
• The BCM system provides field maintenance or upgradeability via a wiring harness connection allowing the addition and replacement of individual sensors.  Others off only a fixed component system carried on a PCB that must be abandoned within your panels and bypassed with an inelegant hardware configuration when upgraded or repaired.
• Snap and screw-on cuircuit sensors with integral protection resistor
• Fully enclosed electronics module
• Individual branch power-down capabilities
• Single system monitors up to 168 circuits - Can be up to 4 panelboards or a combination of panelboards and subfeeds
• BCM monitors up to 10 subfeeds including Total Harmonic Distortion (THD)
• BCM monitors up to 40 subfeeds without Total Harmonic Distortion (THD)
• Monitor up to 2688 circuits with one central display

Branch Circuit Management Resources

• BCM Brochure
• BCM Owner's/Operator's Manual
• Branch/Subfeed Circuit Management Configurator/Monitor User's Manual